current location：Home>>Product>>TC Viton Oil Seal
TC Viton Oil Seal
Oil seal is mainly used to seal media with pressure. It has advantages when sealing low viscosity and gaseous media.
TC type oil seal is double lip (one main lip and one auxiliary lip), one spring, and the steel framework is completely wrapped by rubber. It is used in the situation of low pressure, one side has sealing medium and the other side has slight dust. The maximum pressure is 0.03mpa (0.3kgf / cm2).
Fluororubber, with a service temperature of minus 20 ° to 250 °, has good heat resistance, excellent oil resistance and chemical resistance. Among all kinds of rubber, the oil seal has the best material with rubber performance balance.
There are more than 5000 models of fluororubber materials, with sufficient inventory:
TC type oil seal is double lip (one main lip and one auxiliary lip), one spring, and the steel framework is completely wrapped by rubber. It is used in the situation of low pressure, one side has sealing medium and the other side has slight dust. The maximum pressure is 0.03mpa (0.3kgf / cm2).
Fluororubber, with a service temperature of minus 20 ° to 250 °, has good heat resistance, excellent oil resistance and chemical resistance. Among all kinds of rubber, the oil seal has the best material with rubber performance balance.
There are more than 5000 models of fluororubber materials, with sufficient inventory:
Number of hits：8476 Entry time：2023-08-23 08:42:26【Print this page】【return】
